Innovita Primo 6 - LPG Gas Water Heater - Morco Eup6 / Mp6 / D61B D61E Replacement | ErP A+
The Innovita Primo 6 is a neat, wall-mounted LPG instantaneous gas water heater which is capable of delivering up to 6 litres per minute at a temperature boost of 25 degrees and has a maximum output of 11.6kW. Its ErP A+ rating doesn't go unnoticed, and it's also a direct replacement for the discontinued Morco Eup6, Mp6 (Primo 6), D61B and D61E models which shared most of their components for a hassle-free swap. It has a simple battery-powered electronic ignition system, flame failure device, 37mbar LPG supply pressure and a 90mm flue. It's ideal for installation in static caravans and off grid properties. It comes with a 2 year warranty.
When Morco stopped making the Eup6 in 2022, the Innovita Primo 6 stepped up to be the like-for-like model - and it's more or less a straight swap. The two models share the majority of their components, so you can be pretty sure that your existing pipework, flue connections and wall fixings will not need any adjustments. For anyone upgrading an old Morco unit in a static caravan or holiday home, the Primo 6 is definitely the way to go.
It's an on-demand heater - no cylinder to get filled, no pre-heating, no waiting about for ages. Just turn on the tap and the burner lights up using a simple battery-powered electronic ignition system. Its maximum output is 11.6kW at 37mbar LPG supply pressure, and it can deliver up to 6 litres per minute at a 25 degree temperature boost. The operating pressure range is 0.2 to 10 bar, which covers the sort of water supply you'd typically find in a static caravan. The unit is ErP A+ rated, which means it's very good at keeping LPG consumption and running costs low as can be. The maximum water temperature is 60 degrees with a low NOx output of 29mg/kWh.
The Primo 6 is pretty compact at 550 x 255 x 246mm and is designed to be wall-mounted, so it should fit into the same tight spaces that Morco owners have grown accustomed to. Water and gas connections are both 1/2" Bsp and the flue is 90mm in diameter. It also comes with a standard flame failure device for added safety. The unit runs solely on battery power - no mains electrical connection required.
Key Features & Benefits
- Direct Morco replacement - for the old Eup6, Mp6 (Primo 6), D61B and D61E models. Most of the bits are shared, so you shouldn't need to make any changes to pipework, flue or fixings.
- On demand LPG Hot Water - no tank to get filled. Just turn on the tap, and the burner lights up using battery power - instant hot water, every time.
- 11.6 kW Maximum Output - delivers up to 6 litres per minute at a 25 degree temperature boost on 37mbar LPG supply. Low output of 6.6 kW for when there's low demand.
- ErP A+ Energy Rating - top of the line for efficiency, keeping LPG consumption and running costs to a minimum for static caravans and off-grid properties.
- Flame Failure Device - automatically shuts off the gas if the burner flame is lost, so you can be sure of meeting all current safety requirements.
- Battery powered electronic ignition - no mains electrical connection needed. Its perfect for off-grid and caravan installations where a power supply is not available.
- Low NOx Emissions - a maximum of 29mg/kWh NOx output - well within current environmental standards.
- Compact wall mount design - 550 x 255 x 246mm. Fits in exactly the same footprint as the old Morco units, so you should be able to squeeze it into tight spaces no problem.
- Half inch Bsp water & gas connections - standard fittings that will fit most caravan and residential plumbing.
- wide operating pressure range - 0.2 to 10 bar. Covers low pressure caravan water supplies right through to mains pressure supplies.
- 2 year warranty - peace of mind from a reputable manufacturer.
Ideal For
- Anyone looking for a direct replacement for the old Eup6, Mp6, D61B or D61E water heaters
- Static caravans needing reliable on-demand LPG hot water
- Off-grid properties, holiday homes and park homes with no mains gas supply
- Installations where space is tight and weight is a consideration
- Sites with no mains electrical supply - battery ignition means no need for a power connection
- Owners seeking to upgrade from an old unit, and looking for a efficient, high spec model
The direct Morco replacement - ErP A+ rated, battery powered, ready to fit. Order the Innovita Primo 6 today. Must be installed by a suitably qualified LPG gas engineer, in line with current Gas Safety Regulations.
