You will be redirected to another Calor store to view this cylinder.
Description
Speed Queen LDG Commercial Gas Tumble Dryer – 8.2kg | Rear Controls | LPG | Launderette & Hotel
Speed Queen LDG commercial natural gas vented tumble dryer with rear-mounted American-style controls. 8.2kg capacity, 200 litre drum, 22,500 BTU/h, 3/8" BSP gas inlet. 6 pre-set drying cycles with time-remaining display. Advanced moisture sensor, axial airflow, galvanised steel cylinder. 102mm exhaust outlet. Factory fitted for LPG. 2-year parts warranty. Built for 25 years of commercial performance.
The Speed Queen LDG is the rear-controlled gas version of the Speed Queen commercial tumble dryer range - rear-mounted controls in the American style with a digital time-remaining display, leaving a clean uninterrupted front face for launderette installations. The 200 litre drum provides enough volume for 8.2kg loads with adequate tumble room for even drying. The axial airflow pattern combined with an advanced moisture sensor produces consistent drying results while avoiding over-drying - the moisture sensor stops the cycle when the load reaches the selected dryness level rather than relying purely on time.
Gas supply is 3/8" BSP at 22,500 BTU/h (approximately 6.6kW). The machine is factory-fitted for LPG installations. Vented exhaust via the 102mm outlet (220 cfm / 105 L/s airflow) - a vented waste outlet is required. Gas Safe registered engineer installation required.
Key Features & Benefits
Rear-Mounted American-Style Controls - Time-remaining display. Clean front face for launderette and hotel installations.
6 Pre-Set Drying Cycles - Regular, perm press, delicate, time dry, quick dry and fluff-up. Energy-saving refresh mode (no heat). Intelligent cycle to save utility costs.
Advanced Moisture Sensor - Stops the cycle at the set dryness level rather than relying purely on time. Avoids over-drying.
Axial Airflow Pattern - Even heat distribution through the drum for consistent results.
200 Litre Drum - 8.2kg Capacity - Large drum volume provides tumble room for thorough drying.
Galvanised Steel Cylinder - Heavy-duty construction for commercial longevity.
3/8" BSP Gas Inlet - 22,500 BTU/h (approx. 6.6kW)
Factory Fitted for LPG - Natural Gas conversion kit available as optional extra.
